EALs
Clarity® Synthetic EA Hydraulic Oil 100
EALs
Clarity® Synthetic EA Hydraulic Oil 100
Description

Clarity® Synthetic EA Hydraulic Oil 100 is an ash free readily biodegradable high performance hydraulic oil that meets EPA Vessel General Permit (VGP 2013) requirements for environmentally acceptable lubricants. It is designed to give maximum protection in hydraulic equipment used on vessels and in environmentally sensitive areas. Clarity Synthetic EA Hydraulic Oil 100 is designed to give maximum protection in hydraulic equipment used in vessels and in both mobile and stationary hydraulic pumps in high-performance industrial applications. It is formulated with synthetic base stock and an ashless, zinc-free additive system that can provide good oxidation stability, water separability, foam suppression, and protection against wear, rust and corrosion. Clarity Synthetic EA Hydraulic Oil 100 is a high VI synthetic product which allows for operation over a wide temperature range.

Typical Characteristics
MPID
219013
Viscosity, Kinematic cSt at 40°C
100
Viscosity, Kinematic cSt at 100°C
18.8
Viscosity Index
210
Flash Point, °C
193
Pour Point, °C
-48
Copper Corrosion
1b
Rust Test, Synthetic Sea Water
PASS
FZG, Fail Load Stage
12
Elastomer Compatibility
Buton-N, Viton, Polyurethane
PASS
Biodegradability, OECD 301B, % in 28 days
>60
Aquatic Toxicity
Fathead minnow, OECD 203, mg/L
>10.000
Daphina magna, OECD 202, mg/L
>120
Algae, OECD 201, mg/L
>10.000
Bioaccumulation
Negative 
Recommended Uses

Clarity Synthetic EA Hydraulic Oil 100 is designed to give maximum protection in hydraulic equipment used on vessels and in environmentally sensitive areas. This lubricant is readily biodegradable, non-bio accumulative, and minimally toxic. In the event of a spill, the product biodegrades by more than 60% within 28 days, minimizing the impact to the environment.

Clarity® Synthetic EA Hydraulic Oil 100 Is Approved For:

SKF

Wärtsilä

B&V

Kobleco

Clarity® Synthetic EA Hydraulic Oil 100 Is Recommended For Use In:

Blohm+Voss

HEPR in mobile and stationary hydraulic vane-piston gear-type pumps

Performance Benefits

1. Environmentally Acceptable

Meets the requirements of the EPA Vessel General Permit (VGP 2013) for biodegradation, low toxicity and low bioaccumulation.

2. Zinc-Free

Suited for applications involving yellow metals found in axial piston pumps.

3. Long Oil Life

Good ability of the synthetic base stock to withstand oxidation at high operating temperatures can result in maximum service life for the oil relative to vegetablebased readily biodegradable products.

4. Low Temperature Pumpability

Specifically developed with high viscosity index to help ensure good fluidity for low operating temperatures.

5. Premium Performance

Ashless formulation helps to provide good protection against wear of hydraulic pumps, as well as rust and corrosion protection, hydrolytic stability, water separability, foam inhibition, and filterability.